Comments on: Advances In High-Performance Cooling For Electronics

By: George Meyer

George Meyer — Thu, 15 Dec 2011 04:07:05 +0000

Great article! One common misconception is the effective thermal conductivities of heat pipes. These numbers are often overstated. In typical electronics cooling designs the numbers often run from about 1500 W/mK to 30,000 W/mK with the higher numbers in applications where the heat is moved some distance to a remote heat exchanger. Yes, there are examples out there with numbers in the 50,000 to 200,000 W/mK range but they are the exception.

By: Mani Subramanian

Mani Subramanian — Thu, 08 Dec 2011 22:10:19 +0000

Excellent and very comprehensive review. Thanks for publishing this article. A good educational resource.

By: Ray T

Ray T — Fri, 18 Nov 2011 18:07:58 +0000

I greatly appreciate the breadth of this review and details for each, though I wish an update could be completed. Much development has happened in the past 5-6 years since the research on this article was completed.

By: Yunn Boon

Yunn Boon — Wed, 01 Jun 2011 08:43:14 +0000

Very nice article on cooling for electronics. Can i have the complete list of references? Thank you.

By: T Settu Ph.D

T Settu Ph.D — Mon, 23 May 2011 08:32:49 +0000

Very interesting and comprehensive thermal management article. A complete list of reference article would be a plus and appreciate if you can able to send to email id

By: Ismael

Ismael — Tue, 17 May 2011 09:39:15 +0000

Good work!! Could you email all the references please?
Thank you.

By: Charles Becker

Charles Becker — Fri, 29 Apr 2011 11:35:37 +0000

Good paper. Please email a complete list of references.
Thanks

By: Chirag

Chirag — Fri, 19 Nov 2010 08:32:59 +0000

I am interested to know more about efficient heat transfer through embeded components in the printed wire boards.

By: Naimesh

Naimesh — Fri, 19 Nov 2010 06:32:42 +0000

i want to have deatil catelogue on heat pipe,Microchannels and Minichannels

By: James Hwang

James Hwang — Sun, 07 Nov 2010 15:46:39 +0000

if it is possible to combine the stirling engine with heat-sink for heat transfer by self-consumption?

By: Mr. Maxime Gauthier

Mr. Maxime Gauthier — Thu, 19 Aug 2010 15:37:42 +0000

Very interesting paper, but the list of reference is incomplete! Could you provide the rest of the list by email?

Thank you.

Maxime Gauthier, Ph.D.
Research Officer
Industrial Materials Institute
National Research Council Canada