Introduction This article will discuss air-cooled compact heat exchanger design using published data. Kays & London's Compact Heat Exchangers [1] contains measured heat transfer and pressure drop data on a variety of circular and rectangular passages including circular tubes, tube banks, straight fins, louvered fins, strip or lanced offset fins, wavy fins and pin fins. … [Read more...]
Cooling Technology Options, Part 2
(Editor's Note: Part 1 of this article appeared in the August 2003 issue of ElectronicsCooling. Illustration references in this part begin with Figure 5.) Cooling electronic systems is one of the major focal points of the design process and the key to a successful product launch. Many options to attain successful operation are available, ranging from passive cooling to … [Read more...]
Cooling Technology Options
(Editor's Note: Part 2 of this article will appear in the November 2003 issue of ElectronicsCooling.) Cooling electronic systems is one of the major focal points of the design process and the key to a successful product launch. Many options to attain successful operation are available, ranging from passive cooling to cryogenics. These options are obviously power dissipation … [Read more...]
Electroosmotic Microchannel Cooling System for Microprocessors
Computer heat sinks, such as fin arrays and heat pipes, are much larger than silicon chips and are continuing to grow in size. This trend is driven by the increasing chip heat generation rates and has serious implications for overall system performance. The large volume of existing heat sinks causes discrete memory, video, and power-delivery components to be crowded away from … [Read more...]
Estimating Temperatures in a Water-to-Air Hybrid Cooling System
As most readers are no doubt aware, the trend towards ever increasing processor module power is making it more and more difficult to cool directly with air. Many thermal engineers are convinced that water cooling may be the answer. This does not necessarily mean that cooling water must be supplied by the customer. Instead, in some instances it may be possible to use a … [Read more...]
