Introduction It comes as no surprise to anyone in our industry that device power levels are increasing to support customer expectations of ever greater functionality and performance. The greatest thermal challenges in computing occur in the packaging of processors. This results not only from the fact that processors typically have the largest overall power dissipation in a … [Read more...]
So Many Chips, So Little Time; Device Temperature Prediction in Multi-Chip Packages
Introduction The same trend that has led to ever-higher levels of integration of computation and processing functions on a single chip is now driving the integration of several chips into the same package. The use of multi-chip packages (MCPs) enables miniaturization of a circuit when it is not practical to incorporate all of the desired functionality on a single chip. The … [Read more...]
Solid-State Microrefrigerator on a Chip
Introduction Temperature control of microelectronic devices has become more important in recent years. Device miniaturization and higher switching speeds have increased power dissipation substantially. Limiting the maximum die temperature has resulted in an increase of packaging complexity and cost. The failure rates resulting from electromigration and oxide breakdown are … [Read more...]
Direct Die Attach Using a Room Temperature Soldering Process
As the power and power density of IC components continue to rise [1], the need to effectively dissipate the heat to ensure long-term reliability has increased [2]. The largest contributor to the total thermal resistance along the heat conduction path comes from the thermal interface material (TIM) used between the surfaces of the silicon die and the heat spreader or heat sink. … [Read more...]
On-Chip Electrowetting Cooling
Introduction Control of component temperatures and temperature gradients is essential for the successful operation and reliability of electronics products [1]. However, conventional cooling methods, such as natural convection or fan-induced air-cooling, cannot cope with the increasing demand for electronics cooling. Therefore, more sophisticated cooling techniques are required. … [Read more...]
- « Previous Page
- 1
- …
- 30
- 31
- 32
- 33
- 34
- …
- 41
- Next Page »
